探棒-Probe
上架時間
HP-9250
250MHz Switch Selectable x1/x10/Ref Proble
商品介紹
The Oscilloscope Probe 1:1-1:10 - HP-9250 is a 1:1-1:10 selectable passive high impedance oscilloscope probe with 250 MHz bandwidth (1:10) designed and calibrated for use on oscilloscopes having an input impedance of 1 MOhm shunted by 20 pF. However, it may be compensated for use with an oscilloscope having an input capacitance of 15 to 35 pF.
The oscilloscope probe incorporates a three position slide switch in the head which selects the attenuation of X1, X10 or a ground reference position.
The modular construction facilitates simple field replacement of the major parts.
Oscilloscope Probe 1:1-1:10 - HP-9250 - Specification |
||
|---|---|---|
| Attenuation ratio | 1:1 | 1:10 |
| Max. input voltage | 300 V CAT I / 150 V CAT II (DC + peak AC), derating with frequency |
600 V CAT I / 300 V CAT II (DC + peak AC), derating with frequency |
| Input resistance | 0 Ohm plus 1 MOhm oscilloscope input resistance | 9 MOhm ± 1% plus 1 MOhm oscilloscope input impedance |
| Input capacitance | 47 pF plus oscilloscope input capacitance | Approx. 17 pF |
| Bandwidth | DC to 6 MHz | DC to 250 MHz |
| Rise time | 58 ns | 1.4 ns |
| Compensating range | - | 10 to 35 pF |
| Cable length | 1.2 m (47 inch) | |
| Operating temperature | -10 °C to 55 °C | |
| Relative humidity | ≤ 85 % (at 35 °C) | |
| Safety | meets EN61010-031 CAT II | |
| Accessories | Channel identifier clip Sprung hook Ground lead Insulating tip IC tip Adjusting tool Measuring tip Sprung earth tip BNC adapter |
|